Medium Power Battery Tester
MACCOR S4000H Battery Testing Equipment
MACCOR S4000H is a multifunctional, fully automatic, programmable test desktop battery test system, which can be used for research and development and quality control of various types of batteries. MC8 includes the following functions:
· The test equipment is controlled by a microcomputer with internal memory, and the test program can be completely downloaded to the test equipment for operation. · Each test channel in the system is relatively independently controllable. · Test mode can be defined as constant current, constant power, constant resistance, and constant voltage.
· Each test mode can have 16 different termination conditions. · The test process can be transferred to other test steps based on the end conditions.
· Four levels of nesting can be applied in each test procedure.
· The test system can display, trace and print test data or complete test process in real time.
· Can be used online with the environmental test chamber. Test system is calibrated once a year according to NIST standards
|Device name||High-precision power battery tester||High-precision battery tester||Power battery test system|
|voltage range||0 ~ 5V / -5V ~ + 5V / 0 ~ 10V||0 ~ 5V / -5V ~ + 5V / 0 ~ 10V||0 ~ 180V|
|Voltage accuracy||± 0.02% FS||5A / 150mA / 5mA / 150uA||± 0.02% FS|
|Voltage range||50A / 5A / 500mA||200A / 20A / 2A||0 ~ 2000A|
|data collection||10mS / 5mS / 2mS||10mS / 5mS / 2mS||10mS / 5mS / 2mS|
|Operation mode||Constant current, constant voltage, constant power, constant resistance, waveform mode, formula mode|
|Optional accessories||Auxiliary temperature detection channel, auxiliary voltage detection channel, auxiliary pressure detection channel, SMB intelligent battery test, I2C, HDQ, CAN communication function, thermistor input, digital I / O function, etc ...|
|Equipment size||81cm (D) X220cm (H) X64cm (W)|
S4000H desktop battery testing equipment is a high-precision battery test system produced by MACCOR in the United States. The main testing functions of this battery test system are as follows:
1. Constant current charge and discharge test
2. Constant voltage charge and discharge test
3． Constant power charge and discharge test
4． Constant resistance discharge test
5. Current step or slope test
6. Current pulse or power pulse test
7. Capacity test
8. Cycle life experiment
9. Overcharge and Overdischarge Rate Withstand Capability Experiment
10． Charge retention ability experiment
11. Battery performance test at different temperatures
12. DCIR resistance test
13. 1KHz AC impedance test
14. HPPC and PITT test
15. Pulse test
16. Variable test
17. Real-time capacity rate test
18. Real-time working condition simulation test
Fourth, equipment software functions
The software of MACCOR battery test equipment is powerful, the interface is simple, easy to use, and the man-machine interface is friendly. Engineers or operators with battery test equipment application experience can independently operate the software application of MACCOR battery test equipment with only half an hour of training After receiving half an hour of training, you can independently perform software test programming, start testing, test data viewing, export and test graphics viewing and editing, and more detailed functions will be trained on-site during the equipment use training process.